Please call Dave Garrett,
our Sales Manager, at 1-731-613-2031
to get the current price for the model and unit type that fits
your particular pressure washing application and equipment
specifications. We also offer volume discounts on sales in
quantities of 10 or more units.
Click to select type of product to see model specifcations.
| Terms
are C.O.D., credit card, or check that clears. Net 30 available to approved
distributors and OEMs. Cost in quantities 10 and above is less 5%. Delivery is stock to 40 days. Two (2) handheld encapsulated transmitters included with each Remote Control Unit. Rolling code transmitter for interference prevention. All mounting hardware is included. |
SERIES
RWC-10000: Stationary electric wall mount
remote controllers
MODEL
RWC-11100B radio link controller (Best buy of the
controllers.)
Designed for 2-step cold water PW
with electric motor drive that already have the 5-pin Amphenol © connector
installed on the PW machine for use with remote wire hose. Unitized assembly,
complete and ready to run. Minimum installation time. Whip antenna mounted through
the top of the enclosure. No external coax cable. Audible annunciator mounted
through the bottom of the enclosure. Internal power supply (120 VAC source)
and 15 feet of power cord. Isolated relay contacts for PW machine control. 7
Amp rating, low voltage. Equipped with 5 pin Amphenol © connector and 15
feet of control cable. Plug and play. NEMA 4 rated fiberglass housing with windowed
door.
MODEL RWC-11100I radio link controller (Best buy of
the controllers.)
Designed for 1-step hot water PW
with electric motor drive that already have the 5-pin Amphenol © connector
installed on the PW machine for use with remote wire hose. Unitized assembly,
complete and ready to run. Minimum installation time. Whip antenna mounted through
the top of the enclosure. No external coax cable. Audible annunciator mounted
through the bottom of the enclosure. Internal power supply (120 VAC source)
and 15 feet of power cord. Isolated relay contacts for PW machine control. 7
Amp rating, low voltage. Equipped with 5 pin Amphenol © connector and 15
feet of control cable. Plug and play. NEMA 4 rated fiberglass housing with windowed
door.
MODEL RWC-12100B radio link controller
Designed for 2-step cold water PW
with electric motor drive that already have the 5-pin Amphenol © connector
installed on the PW machine for use with remote wire hose. Whip antenna is remote
mounted on stainless steel wall mount bracket. (ACC-1222) 15 feet of coaxial
cable. External audible annunciator is high volume horn. 15 feet of cable is
provided with 2 pin Amphenol © connector for connection to control cabinet.
Internal power supply (120 VAC source) and 15 feet of power cord.Isolated relay
contacts for PW machine control. 7 Amp rating, low voltage. Equipped with 5
pin Amphenol © connector and 15 feet of control cable. Plug and play. NEMA
4 rated fiberglass housing with windowed door.
MODEL RWC-12100I radio link controller
Designed for 1-step hot
water PW with electric motor drive that already have the 5-pin Amphenol
© connector installed on the PW machine for use with remote wire hose.
Whip antenna is remote mounted on stainless steel wall mount bracket. (ACC-1222)
15 feet of coaxial cable. External audible annunciator is high volume horn.
15 feet of cable is provided with 2 pin Amphenol © connector for connection
to control cabinet. Internal power supply (120 VAC source) and 15 feet of power
cord. Isolated relay contacts for PW machine control. 7 Amp rating, low voltage.
Equipped with 5 pin Amphenol © connector and 15 feet of control cable.
Plug and play.
NEMA 4 rated fiberglass housing with windowed door.
MODEL RWC-12300B radio link controller
Designed for 2-step cold water PW
with electric motor drive. Stationary wall mount. NEMA 4 rated fiberglass housing
with windowed door. Internal power supply (120 VAC source) and 15 feet of power
cord. Whip antenna is remote mounted on stainless steel wall mount bracket.
(ACC-1222) 15 feet of coaxial cable. Three color light stack (clear/blue/red)
for visual annunciation of machine status, on stainless steel wall mount bracket.
15 feet of cable provided. Connection to wall mount controller by 6 pin Amphenol
© connector. Audible annunciator built into the remote light stack, with
defeat/enable switch. Isolated relay contacts for PW machine control. 7 Amp
rating, low voltage. Equipped with 5 pin Amphenol © connector and 15 feet
of control cable. Plug and play.
SERIES RWC-20000: Mobile
remote controllers
MODEL RWC-22200A radio link controller
Designed for 2-step
cold water PW with gas engine, direct drive to
pump, engine start/stop. PW machines that already have the 5-pin Amphenol ©
connector installed for use with remote wire hose are direct plug-and-play.
Mobile mount. Vibration isolation mounting provided. NEMA 4 rated fiberglass
housing with windowed door. Internal power supply (12 VDC source) and 15 feet
of power cord. Whip antenna is remote mounted on stainless steel mount bracket.
(ACC-1222) 15 feet of coaxial cable. External audible annunciator is high volume
horn. 15 feet of cable is provided with 2 pin Amphenol © connector for
connection to control cabinet. Isolated relay contacts for PW machine control.
7 Amp rating, low voltage Equipped with 5 pin Amphenol © connector and
15 feet of control cable. Plug and play.
MODEL
RWC-22200B radio link controller
Designed for 2-step cold water PW
with gas engine, clutch drive to pump, engine stop. PW machines that already
have the 5-pin Amphenol © connector installed for use with remote wire
hose are direct plug-and-play. Mobile mount. Vibration isolation mounting provided.
Mounting hardware is included. NEMA 4 rated fiberglass housing with windowed
door. Internal power supply (12 VDC source) and 15 feet of power cord. Whip
antenna is remote mounted on stainless steel mount bracket. (ACC-1222) 15 feet
of coaxial cable. External audible annunciator is high volume horn. 15 feet
of cable is provided with 2 pin Amphenol © connector for connection to
control cabinet. Isolated relay contacts for PW machine control. 7 Amp rating,
low voltage Equipped with 5 pin Amphenol © connector and 15 feet of control
cable. Plug and play.
MODEL RWC-22202A radio link controller
Designed for 2-step cold water PW
with gas engine, direct drive to pump, engine stop. Power semiconductor outputs
for PW control. 3 Amp rating, low voltage dc. Before applying this model, consult
factory for application to your machine. Mobile mount. Vibration isolation mounting
provided. Mounting hardware is included. NEMA 4 rated fiberglass housing with
windowed door. Internal power supply (12 VDC source) and 15 feet of power cord.
Whip antenna is remote mounted on stainless steel mount bracket. (ACC-1222)
15 feet of coaxial cable. External audible annunciator is high volume horn.
15 feet of cable is provided with 2 pin Amphenol © connector for connection
to control cabinet. Equipped with 5 pin Amphenol © connector and 15 feet
of control cable.
MODEL RWC-22202B radio link controller
Designed for 2-step cold water PW
with gas engine, clutch drive to pump, engine stop. Power semiconductor outputs
for PW control. 3 Amp rating, low voltage dc. Before applying this model, consult
factory for application to your machine. Mobile mount. Vibration isolation mounting
provided. Mounting hardware is included. NEMA 4 rated fiberglass housing with
windowed door. Internal power supply (12 VDC source) and 15 feet of power cord.
Whip antenna is remote mounted on stainless steel mount bracket. (ACC-1222)
15 feet of coaxial cable. External audible annunciator is high volume horn.
15 feet of cable is provided with 2 pin Amphenol © connector for connection
to control cabinet. Equipped with 5 pin Amphenol © connector and 15 feet
of control cable.
MODEL RWC-22203I radio link controller
Designed for 1-step hot water PW
with gas engine, direct drive to pump, engine start/stop. AC power switch for
control of 120VAC to boiler. (ACC-1710) Mobile mount. Vibration isolation mounting
provided.. NEMA 4 rated fiberglass housing with windowed door. Internal power
supply (12 VDC source). Universal adapter (ACC-1513) for machine interface,
with 15 feet of control cable. A small amount of electrical wiring is required
on the PW machine. Whip antenna is remote mounted on stainless steel mount bracket.
(ACC-1222) 15 feet of coaxial cable External audible annunciator is high volume
horn. 15 feet of cable is provided with 2 pin Amphenol © connector for
connection to control cabinet. Isolated relay contacts for PW machine control.
7 Amp rating, low voltage.
MODEL RWC-22503I radio link controller
Designed for 1-step hot water PW
with gas engine, no clutch, engine start/stop. AC power switch for control of
120VAC to boiler. (ACC-1710) Visual indicator (3 strobe lights) for machine
status. Mobile mount. Vibration isolation mounting provided..
NEMA 4 rated fiberglass housing with windowed door. Internal power supply (12
VDC source). Universal adapter (ACC-1513) for machine interface, with 15 feet
of control cable. A small amount of electrical wiring is required on the PW
machine.
Whip antenna is remote mounted on stainless steel mount bracket. (ACC-1222)
with 15 feet of coaxial cable. External audible annunciator is high volume horn.
15 feet of cable is provided with 2 pin Amphenol © connector for connection
to control cabinet.
Isolated relay contacts for PW machine control. 7 Amp rating, low voltage.
MODEL RWC-22203D radio link controller
Designed for 1-step hot water PW with gas engine,
clutch drive to pump, engine stop. AC power switch for control of 120VAC to
boiler. (ACC-1710) Mobile mount. Vibration isolation mounting provided. NEMA
4 rated fiberglass housing with windowed door. Internal power supply (12 VDC
source). Universal adapter (ACC-1513) for machine interface, with 15 feet of
control cable. A small amount of electrical wiring is required on the PW machine
Whip antenna is remote mounted on stainless steel mount bracket. (ACC-1222)
15 feet of coaxial cable. External audible annunciator is high volume horn.
15 feet of cable is provided with 2 pin Amphenol © connector for connection
to control cabinet. Isolated relay contacts for PW machine control. 7 Amp rating,
low voltage.
MODEL RWC-22204I radio link controller
Designed for 1-step hot water PW
with gas engine, direct drive to pump, engine start/stop. DC power switch for
control of 12 VDC to boiler. (ACC-1712) Mobile mount. Vibration isolation mounting
provided. NEMA 4 rated fiberglass housing with windowed door. Internal power
supply (12 VDC source). Universal adapter (ACC-1513) for machine interface,
with 15 feet of control cable. A small amount of electrical wiring is required
on the PW machine Whip antenna is remote mounted on stainless steel mount bracket.
(ACC-1222) 15 feet of coaxial cable. External audible annunciator is high volume
horn. 15 feet of cable is provided with 2 pin Amphenol © connector for
connection to control cabinet. Isolated relay contacts for PW machine control.
7 Amp rating, low voltage.
MODEL RWC-22204L radio link controller
Designed for 1-step hot water PW
with gas engine, no clutch, engine start/stop. This model has the panic alarm
feature for remote shut down/lockout and continuous alarm horn. One additional
handheld transmitter is programmed exclusively for the panic alarm. DC power
switch for control of 12 VDC to boiler. (ACC-1712) Mobile mount. Vibration isolation
mounting provided.
NEMA 4 rated fiberglass housing with windowed door. Internal power supply (12
VDC source). Universal adapter (ACC-1513) for PW machine interface, with 15
feet of control cable. A small amount of electrical wiring is required on the
PW machine.
Three handheld epoxy encapsulated transmitters are provided. Whip antenna is
remote mounted on stainless steel mount bracket. (ACC-1222)15 feet of coaxial
cable. External audible annunciator is high volume horn. 15 feet of cable is
provided with 2 pin Amphenol © connector for connection to control cabinet.
Isolated relay contacts for PW machine control. 7 Amp rating, low voltage.
MODEL RWC-22204D radio link controller
Designed for 1-step hot water PW
with gas engine, clutch drive to pump, engine stop. DC power switch for control
of 12 VDC to boiler. (ACC-1712) Mobile mount. Vibration isolation mounting provided.
Mounting hardware is included. NEMA 4 rated fiberglass housing with windowed
door. Internal power supply (12 VDC source). Universal adapter (ACC-1513) for
machine interface, with 15 feet of control cable. A small amount of electrical
wiring is required on the PW machine Whip antenna is remote mounted on stainless
steel mount bracket. (ACC-1222) 15 feet of coaxial cable. External audible annunciator
is high volume horn. 15 feet of cable is provided with 2 pin Amphenol ©
connector for connection to control cabinet. Isolated relay contacts for PW
machine control. 7 Amp rating, low voltage.
MODEL RWC-22209B radio link controller
Designed for 2-step hot water PW
with gas engine, clutch control. Direct application to Largo PW machines that
already have the 5-pin Amphenol © connector installed for use with remote
wire hose are direct plug-and-play. No wiring changes to the machine. Mobile
mount. Vibration isolation mounting provided. Mounting hardware is included.
NEMA 4 rated fiberglass housing with windowed door. Internal power supply (12
VDC source) and 15 feet of power cord. Whip antenna is remote mounted on stainless
steel mount bracket. (ACC-1222) 15 feet of coaxial cable. External audible annunciator
is high volume horn. 15 feet of cable is provided with 2 pin Amphenol ©
connector for connection to control cabinet. Isolated relay contacts for PW
machine control. 7 Amp rating, low voltage. Equipped with 5 pin Amphenol ©
connector and 15 feet of control cable. Plug and play.
MODEL RWC-22210N radio link controller
Designed for 2-step hot water PW
with gas engine, boiler control, clutch control. Direct application to Largo
PW machines that already have the 5-pin Amphenol © connector installed
for use with remote wire hose. Wiring changes to the machine are required.
Mobile mount. Vibration isolation mounting provided. Mounting hardware is included.
NEMA 4 rated fiberglass housing with windowed door. Internal power supply (12
VDC source) and 15 feet of power cord. Whip antenna is remote mounted on stainless
steel mount bracket. (ACC-1222) 15 feet of coaxial cable. External audible annunciator
is high volume horn. 15 feet of cable is provided with 2 pin Amphenol ©
connector for connection to control cabinet. Isolated relay contacts for PW
machine control. 7 Amp rating, low voltage. Equipped with 5 pin Amphenol ©
connector and 15 feet of control cable.
ACCESSORIES
ACC-1110 Hand held transmitter
| Non encapsulated with replaceable alkaline battery. |
ACC-1120 Hand held transmitter
| Epoxy encapsulated with long life non replaceable lithium batteries. |
ACC-1221 Antenna, through-the-roof-mounting
| Antenna
kit with 15 feet of coax and connector. Please note that this antenna kit requires precision punching of a hole in the roof, and some mechanical and electrical skills to complete the assembly. |
ACC-1222 Antenna, with wall mount stainless steel bracket
| Antenna assembly with 15 feet of coax and connector, and mounting hardware. |
ACC-1223 Antenna, with wall mount stainless steel bracket
| Antenna assembly with 30 feet of coax and connector, and mounting hardware. |
ACC-1224 Antenna, with 6" x 6" roof mount stainless steel plate
| Antenna
assembly with 15 feet of coax and connector. This is the preferred antenna for covered trailors and vans. |
ACC-1225 Antenna, with 6" x 6" roof mount stainless steel plate
| Antenna
assembly with 30 feet of coax and connector. This is the preferred antenna for covered trailors and vans. |
ACC-1226 Antenna, with wall mount stainless steel bracket
| Antenna assembly with 15 feet of coax and connector. This assembly incorporates the a visual annunciator strobe light assembly ACC-1412 (three colors) for indication of electric machine status. For direct interface to Largo electric PW machines. |
ACC-1227 Antenna, with wall mount stainless steel bracket
| Antenna assembly with 15 feet of coax and connector. This assembly incorporates the a visual annunciator strobe light assembly ACC-1413 (three colors) for indication of mobile machine status. For direct interface to Largo electric PW machines |
ACC-1313 Audible annunciator; horn with cable assembly
| 15 foot cable. |
ACC-1314 Audible annunciator; horn with cable assembly
| 30 foot cable. |
ACC-1412
Visual annunciator, strobe light assembly (three colors)
for indication of electric machine status
| Wall mount stainless steel bracket with 15 feet of cable and plugs for direct interface to Largo electric PW machines, or other machines using similar wiring. No machine modification required. |
ACC-1413
Visual annunciator, strobe light assembly (three colors)
for indication of stationary electric machine status
Special
design, with external 12 volt dc power supply. |
ACC-1414
Visual annunciator, strobe light assembly (three colors)
for indication of mobile machine status
| Special design, with 15 foot cable and 6-pin Amphenol |
ACC-1511 Universal Adapter
| 5 pin Amphenol © connector prewired with control cable, mounted on stainless steel bracket. |
ACC-1512 Universal Adapter
| 6 pin Amphenol © connector prewired with control cable, mounted on stainless steel bracket. |
ACC-1513 Universal Adapter
| 10
pin Amphenol © connector prewired with control cable, mounted on stainless
steel bracket. Application is 2-step hot water, gas engine start/stop. |
ACC-1514 Universal Adapter
| 10
pin Amphenol © connector prewired with control cable, mounted on stainless
steel bracket. Application is 2-step hot water, gas engine stop. |
ACC-1710 AC Power Switch
| Epoxy encapsulated electrically isolated solid state power relay for control of 120 VAC power feed to boilers. 20 amp rating, 120 vac, prewired with all cables. |
ACC-1712 DC Power Switch
| Epoxy encapsulated electrically isolated power relay for control of 12 vdc power feed to boilers. 15 amp rating, 12 vdc, prewired with all cables. |
Terms:
Delivery
is stock to 40 days.
Terms
are C.O.D., credit card, or check that clears. Net 30 available to approved
distributors.
 |
 |